Cisco Headset 700 Series; Cisco Headset 730 Buttons And Hardware - Cisco 7800 Series Accessories Manual

Hide thumbs Also See for 7800 Series:

Table of Contents

Cisco Headset 700 Series

Note

Place an active call on hold before you change to a different call source. Calls on one call source aren't

automatically put on hold when you switch to a different call source.

The Cisco Headset 730 is a wireless headset that uses Bluetooth connectivity to pair with Cisco soft clients

and Cisco IP Phones. The headset features full call control and music playback capabilities in addition to

powerful noise cancellation and ambient audio enhancement systems for use in a busy office environment.

The Cisco Headset 730 comes with a USB Bluetooth Adapter for use with devices that don't offer a reliable

Bluetooth solution. The headset can also connect to devices with the included USB-C to USB-A cable. The

USB-C cable also acts as a charging cable and can connect to any powered USB adapter. The USB-C cable

can also be plugged into the phone USB port to give full functionality, including call control, local tuning and

setup, and firmware upgrades.

For more information see:

index.html

Your headset buttons are used for many features. Each cup has different buttons and functions.

Figure 12: Left and Right Sides of the Cisco Headset 730

Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager

https://www.cisco.com/c/en/us/products/collaboration-endpoints/headset-700-series/

Headsets

Table of Contents

8800 series