Table of Contents
Advertisement
5.2
NVIDIA
The motherboard supports the NVIDIA
you to install multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.
5.2.1
Requirements
•
In SLI
mode, you should have two identical SLI-ready graphics cards that are NVIDIA
®
certified.
•
Ensure that your graphics card driver supports the NVIDIA
the latest driver from the NVIDIA
•
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system.
•
We recommend that you install additional chassis fans for better thermal environment.
•
Visit the NVIDIA
graphics card and supported 3D application list.
5.2.2
Installing two SLI-ready graphics cards
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
To install two SLI-ready graphics cards:
1.
Prepare two SLI-ready graphics cards.
2.
Insert the two graphics card into the PCIEX16 slots. If your motherboard has more
than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the
PCIEX16 slots recommended for multi-
graphics card installation.
3.
Ensure that the cards are properly
seated on the slots.
ASUS WS C422 SAGE/10G
SLI
technology
®
®
SLI
(Scalable Link Interface) technology that allows
®
®
website at www.NVIDIA.com.
®
zone website at http://www.nzone.com for the latest certified
®
SLI
technology. Download
®
®
®
5-7
Advertisement
Table of Contents
