Oki MC851+ User Manual page 92

Broadcasting
This function allows you to send a fax to multiple recipients at the same time. By combining
abbreviation dials, groups and entering addresses using the numeric keypad, you can
specify up to 530 destinations at one time.
NOTE
Up to 30 addresses can be entered using the numeric keys.
NOTE
When real time transmission (Memory Tx set to OFF) or polling is executed
during broadcasting data, they are executed preferentially. In the case of
polling, it is executed preferentially when there is only one address specified.
F Code communication
F Code transmission is a function to communicate, using sub addresses or passwords in
accordance with the ITU-T standard. By creating F code boxes/sub addresses/passwords,
you can execute secure communication, bulletin box communication and polling
communication.
NOTE
> Up to 20 F code boxes can be registered.
> Up to 30 documents can be stored in one box.
Sub address, password and ID code
> A sub address is a number to distinguish various F code boxes that are set in the
memory.
> A password is a key to prevent wrongful sending and receiving.
> An ID code is a key to access a secure box.
By using a sub address and password, the following functions can be used:
> F Code Secure Communication
When an F code secure box is set in the recipient machine, by specifying the sub
address and password (if necessary) of its box, secure communication can be
executed.
On the receiving side of the secure communication, unless the specified ID code is
entered, a received document cannot be printed, therefore, this function is useful
when sending a document that needs a security protection. Refer to
> "Transmission using a sub address (F code transmission)" on page
> "Printing stored documents" on page
> F Code Bulletin Box Communication
When the F code bulletin box is set in the recipient machine, by specifying the sub
address of its notice board, a document can be sent to the bulletin box or a document
stored in the bulletin box can be taken out (polling). (A password can be specified, if
necessary.) Refer to:
> "Transmission using a sub address (F code transmission)" on page
> "Receiving using a sub address (F code polling)" on page
> "Storing documents to the notice board" on page
98.
97.
Operation > 92
96.
96.
97.