Button And Button Descriptions - Beko DSFS 6830 X Manual

Button and Button
Descriptions
On / Off Button (1)
When you press the On/Off button,
the display switches on with the last
program used and it dims when you
turn the machine off.
If the Half Load/Tablet Detergent (5),
function are enabled during the last
program used, these functions will
remain active when the machine is
turned off and on again. If you would
like to disable these functions after
turning the machine off and on again,
you must press the relevant buttons.
Start / Pause / Cancel Button (2)
It is used to start, pause or cancel the
selected program or the delayed start
countdown. The selected program will
start running when the Start / Pause /
Cancel button (2) is pressed. When the
button is pressed, (12) lights up.
Wait for two seconds to view the full
display on the screen after you turn
on the machine by pressing the On/
Off button (1) before you press Start /
Pause / Cancel (2) button.
Program Selection Button (4)
You can select the washing program
you want to use with the aid of the
"Program Data and Table of Average
Consumption Values" after pressing
the program selection button. Number
of the selected program appears in the
program indicator (8) on the display (3)
in the format of
Program number will increase by one
each time you press the program
selection button. Number of the defined
programs can change depending on
the model you have purchased.
Half Load / Tablet Detergent Button
(5)
Half Load / Tablet Detergent Button
allows you to turn on and off the Half
Load and Tablet Detergent functions of
your machine.
Half Load Function
If you want to run your machine without
loading it completely, place your
dishes into the machine as you desire.
Press On / Off button to turn on your
machine. Press the Half Load / Tablet
Detergent button after selecting the
desired programme until Half Load
Indicator lights up, then press Start /
Pause / Cancel button and close the
door of your machine. With the Half
Load option you can use every part of
your lower and upper baskets and you
can save from both water and power.
Tablet Detergent Function
Depending on the hardness level of
the tap water, the Tablet Detergent
function allows obtaining a better
drying performance from the multi-
purpose detergents such as 2in1, 3in1,
4in1, 5in1, etc., called as all-in-one
detergents. Tablet Detergent Indicator
lights when the Tablet Detergent
function is selected.
Salt and Rinse Aid indicators turn off
when this function is activated.
Turn on your machine by pressing
.......
the On / Off key to use the Tablet
Detergent function. Press the Half
Load / Tablet Detergent button after
19 GB