Incoming Call Notification; Changing Ringer Volume - Sanyo SCP-5150 User Manual

Incoming Call Notification

Depending on your settings, your Sprint PCS Phone notifies you of
incoming calls in the following ways:
The phone rings and/or vibrates.
The LED blinks.
The backlight illuminates on the Main LCD.
The backlight illuminates on the Sub LCD when the clamshell is
closed.
If the phone number is available, the phone number of the caller is
displayed on the Main/Sub LCD.
If the phone number is in your Internal Phone Book, the Phone
Book entry's name is displayed on the Main/Sub LCD.
The following options are also displayed by pressing
option, highlight it and press
to answer the call.
Answer
to hang up the incoming call and return to Web. (This feature
Skip
appears when you receive the call while you are in the Web
operation.)
to answer the call by using pre-recorded
Screen Call
announcement. (See page 121.)
to mute the ringer. (This feature appears when the
Quiet Ringer
ringer is set.)
to return to the previous display. (This feature appears when
Exit
there is only one choice in the options.)
Note: You can also mute the ringer by pressing the up or down of the side
volume key, or

Changing Ringer Volume

To change the ringer volume, adjust the volume keys on the side of your
phone when the phone is in Standby mode.
Note: To change the ringer volume from the main menu, see "Adjusting
the Ringer/Key Volume" on page 82.
Section 4
30 Making and Answering Calls
.
.
. To select an