Asko T608HX Instructions For Use Manual page 36

CLEANING THE HEAT PUMP FILTER
Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of injury on sharp
parts. Use appropriate protection gloves when cleaning the heat exchanger.
Incorrect cleaning of the metal fi ns of the heat exchanger can permanently damage the tumble dryer. Do
not press on the metal fi ns with hard objects like for example the plastic tube of a vacuum cleaner.
36
During cleaning, some water may be spilled. It is
1
therefore recommended to place an absorbent
cloth on the fl oor.
Open the outer cover.
Hold the levers on the inside cover and rotate
2
them upwards.
Remove the inside cover.
Use the handle to pull out the heat pump fi lter.
3
Pull the foam part of the heat pump fi lter from the
4
housing. Wash it under running water and dry it
before replacing it in the fi lter housing.
The fi lter may be washed in the washing machine,
with the rinse program on low spin speed. Dry the fi lter
before replacing it in the fi lter housing.
Clean the foam fi lter at least after every 10 drying
cycles or if necessary.