Table of Contents
Advertisement
2.
Set the desired aperture value.
Turn the <
3.
Focus on the subject.
Press the shutter button halfway.
The shutter speed is set automatically.
4.
Check the display and shoot.
As long as the shutter speed is not blinking, the standard exposure will
be obtained.
Caution
If the "30"" shutter speed blinks, it indicates underexposure.
Turn the <
> dial to decrease the aperture value (open the aperture) until the
shutter speed blinking stops or set a higher ISO speed.
If the "1/8000" shutter speed blinks, it indicates overexposure.
Turn the <
> dial to increase aperture value (close the aperture) until the
shutter speed blinking stops or set a lower ISO speed.
> dial to set it.
110
Advertisement
Table of Contents
