Table of Contents
Advertisement
Turning Your Phone On and Off
Turning Your Phone On
Press and hold the Power/Lock button (
located at the top left of the phone.
– or –
Open the phone and press
Once your phone is on and finds a signal, it
automatically enters standby mode – the phone's idle
state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after five
minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your
phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
except numbered keys.
Tip:
The Power Save feature conserves your battery power
when you are in an area where there is no signal.
16
2A. Phone Basics
)
.
Turning Your Phone Off
Press and hold the Power/Lock button (
two seconds until you see the powering off
message on the display screen.
– or –
Open the phone and press and hold
seconds.
Your screen remains blank while your phone is off
unless the battery is charging.
Battery and Charger
WARNING:
Use only Sprint-approved or Kyocera-approved
batteries and chargers with your phone. The
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the
risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.
Sprint-approved or Kyocera-approved batteries and
accessories can be found at Sprint Stores or through
Kyocera; or call 1-866-866-7509 to order. They're also
available at
www.sprint.com
) for
for two
.
Advertisement
Table of Contents
