Huawei MatePad 11.5" User Manual page 48

Connect Your Tablet and Phone
Only certain phones support this feature.
Connect your phone and tablet and enable Multi-Screen Collaboration using one of the
following methods (depending on your device model):
Connect over Bluetooth:
1
Swipe down from the upper right edge of your tablet to display Control Panel, touch
to expand the shortcut switch panel (depending on your device model), and enable Multi-
Screen Collaboration.
2
Swipe down from the upper right edge of the phone to display Control Panel, and enable
Bluetooth.
3
Hold your phone close to your tablet and follow the onscreen instructions to establish a
connection.
Scan a QR code to connect:
1
Open Multi-Screen Collaboration on your tablet, and touch Scan to connect on the
Multi-Screen Collaboration screen.
2
Ensure that your phone is connected to the Internet and connect your phone and tablet as
prompted.
Connect by tapping against an NFC-capable keyboard:
You can tap your phone against the standard NFC-capable keyboard that comes with your
tablet to enable Multi-screen Collaboration.
1
Make sure that your tablet has been paired with the keyboard.
2
Swipe down from the upper right edge of your phone to display Control Panel, touch
to expand the shortcut switch panel (depending on your device model), and enable NFC.
3
Tap the NFC area at the back of your phone (near the rear cameras) against the NFC area
of the keyboard until your phone vibrates or plays a tone.
4
Follow the onscreen instructions on your phone and tablet to complete the connection.
Connect via Super Device:
1
Enable Bluetooth and Wi-Fi and log in to the HUAWEI ID on your phone.
2
Swipe down from the upper right edge of the tablet to display Control Panel, and enable
Wi-Fi and Bluetooth.
If you have not logged in to your HUAWEI ID on your tablet or you are not using the
same HUAWEI ID, go to Settings > Super Device > This device > Visible to, and
selectAll nearby devices.
3
Swipe down from the upper right edge of the phone to display Control Panel, and touch
in Super Device to search for nearby available devices or touch
new device.
Smart Features
> to bind a
46