Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
VACUUM CLEANER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
A9-LITE / A9NEOMASTER / A9NEOMAX / A9NEOMULTI
MFL69883647
Rev.05_062022
Copyright © 2020-2022 LG Electronics Inc. All Rights Reserved.
www.lg.com
Advertisement
Table of Contents
Related Manuals for LG A9-LITE
Summary of Contents for LG A9-LITE
- Page 1 This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. ENGLISH A9-LITE / A9NEOMASTER / A9NEOMAX / A9NEOMULTI www.lg.com MFL69883647 Rev.05_062022 Copyright © 2020-2022 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS This manual may contain images or content that may be different from the model you purchased. This manual is subject to revision by the manufacturer. SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE............3 WARNING ......................3 CAUTION ......................10 INSTALLATION Product Overview.....................12 Installing the Charging Station ..............15 Storing the Accessories ...................17... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk. - Page 4 If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
- Page 5 SAFETY INSTRUCTIONS • When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries. • Follow all local ordinances and regulations when handling or disposing of the battery. • Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.
- Page 6 SAFETY INSTRUCTIONS • Install, charge and store the appliance in a well-ventilated place. • Avoid operating the appliance in areas where there is a risk of leakage of flammable gas, industrial oil or metallic dust. • Do not store or install the appliance, power cord or plug near heating devices or open flames.
- Page 7 • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance. • Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
- Page 8 • If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre. • Use extra care when cleaning on stairs.
- Page 9 SAFETY INSTRUCTIONS • In the event of a gas leak(natural gas, propane gas, etc.), do not operate this or any other appliance. Open a window or door to ventilate the area immediately. • Do not hold the charging station upside down with the battery in the charging station.
-
Page 10: Caution
SAFETY INSTRUCTIONS • Contact your local city council or the related government authority before disposing of this appliance. Mop Nozzle • Do not vacuum sharp objects (glass pieces, wire, blades, pins, etc.) with the mop nozzle attached. When cleaning the mop pads after mopping, you could be injured by a sharp object embedded in the mop. - Page 11 SAFETY INSTRUCTIONS • Do not apply force or any impact to the Cyclonic Mesh Filter. • Do not remove the battery during operation. Mop Nozzle • Do not use the mop nozzle for any purpose(for example, polishing a car, cleaning windows) other than domestic floor cleaning. •...
-
Page 12: Installation Product Overview
INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View *1 This feature is only available on some models. Charging Station Tool Holders Spare Charging Station... - Page 13 INSTALLATION Accessories Nozzles *1 This accessory is only available on some models. Included Accessories Multi-Surface Nozzle Slim Hard Floor Nozzle Bedding Nozzle Pet Nozzle Installation Kit Charging Station Extension Pipe Adapter Wall Anchoring Block Pre-filter Double-Sided Tape Battery (Dual Battery Drywall Anchor Floor Stand Dock Wall Anchoring Screw...
- Page 14 *4 The Nozzle contains the direct drive motor that rotates the nozzle cleaning head directly. Specifications • Model: A9-LITE / A9NEOMASTER / A9NEOMAX / A9NEOMULTI • Dimensions (W x D x H) : 260 mm x 270 mm x 1120 mm •...
-
Page 15: Installing The Charging Station
INSTALLATION Installing the Charging Assemble the charging station onto the top of the floor stand pipe. Station Self-Standing Installation Follow the steps below to install the charging station on a hard and level floor. Place the floor stand dock on a hard and level floor and assemble the floor stand pipe. - Page 16 INSTALLATION to the wall by tightening the anchoring screw Attach the second piece of double-sided tape all the way. to the other side of the wall anchoring block to secure it to the wall. • Do not use double-sided tape on wallpaper. Plug the power cord into the power outlet.
-
Page 17: Storing The Accessories
INSTALLATION • If screwing into drywall, use the drywall Separate the extension pipe and nozzle from anchors. the product body before charging or storing the appliance. Plug the power cord into the power outlet. CAUTION Attach the charging station to the wall with the •... - Page 18 INSTALLATION • The nozzle storage cradle is compatible with the • Store the mop pads completely in a dry state. Slim Hard Floor Nozzle or the Bedding Nozzle. Otherwise, it can result in an unpleasant odour. Assembling the Appliance Follow these steps to safely assemble the appliance.
-
Page 19: Operation Getting Started
The nozzles and tools can accumulate on the appliance. Please contact LG also be attached to the end of the extension Electronics customer information centre if the pipe problem persists. -
Page 20: Charging The Battery
OPERATION • The extension pipe extends in four steps. • Press the - button to decrease the suction power. (Turbo Power Normal) Charging the Battery Before Charging the Battery • Make sure that the adapter is connected to both the charging station and the power outlet. •... -
Page 21: Using The Mop Nozzle
OPERATION • Once the battery is fully recharged, 3 bars will CAUTION remain lighted on the battery level indicator. • Keep fingers away from pinch points when assembling or disassembling the battery from the product body or the charging station to avoid personal injury. - Page 22 • Do not use a soiled mop pad to clean floors. • Use only authorized LG Electronics mop pads. Filling the Water Tank • Empty the dust bin and clean the exhaust filter and the pre-filter after using the mop nozzle.
- Page 23 OPERATION Adjusting the Amount of Water Attach the water tank to the mop nozzle again. • Insert the 2 tabs at the front of the water Press the water adjustment buttons to adjust the tank into the slots on the top of the mop amount of water released onto the mop pad to nozzle.
- Page 24 OPERATION Drying the Water Tank and Mop Shake the water tank to remove the remaining water. Pads Drying the Water Tank When cleaning is completed, make sure to empty the water tank and dry it before storing the mop nozzle. CAUTION •...
-
Page 25: Using The Nozzles And Tools
OPERATION • Storing mop pads in a damp state can result • While cleaning, it was not intended, but pressing in an unpleasant odour. Set the pads in a the PUSH button on the nozzle may remove the well-ventilated area out of direct sunlight for brush. - Page 26 OPERATION Crevice Tool Hard Dirt Tool Use this tool to remove dust from corners or Firm bristles remove solidified dirt from hard narrow spaces. surfaces. Clean up hair or foreign objects that are entangled in carpets or rugs. • Use it for areas with static electricity such as mats.
- Page 27 OPERATION • To convert back to the crevice mode, press in on • The flexible hose extension cannot be used with the power drive Nozzle. the brush release button and slide the brush Adjusting the Length To adjust the length of the tool, press and hold the release button on the side of the tool.
-
Page 28: Maintenance
MAINTENANCE MAINTENANCE Cleaning the Appliance from Hi to Lo power) a few times to alert you to the blocked airflow. The appliance will then automatically turn off to prevent damage. Before Cleaning the Appliance Separate the battery from the product body and remove the foreign objects before resuming use To maintain the optimum suction power, the of the appliance. - Page 29 MAINTENANCE dust and foreign objects can be easily Use the combination tool to clean out dust or removed. foreign objects inside the dust bin. WARNING • Never wash the product body with water. Water could reach the motor and cause electric shock Insert the crevice tool into the Cyclonic Mesh or fire.
- Page 30 MAINTENANCE Rotate the exhaust filter to the unlocked direct sunlight for at least 24 hours before position to separate it from the product reassembling. body. Clean the pre-filter by brushing the dust off it regularly and wash it in running water at least Lift out the pre-filter from the product body.
-
Page 31: Cleaning The Nozzles
MAINTENANCE Cleaning the Nozzles Pull the brush cover forward and pull the brush out. Clean the nozzle and rotating brush regularly. CAUTION • Always separate the nozzle from the product body or remove the battery before cleaning. If the nozzle starts to operate during cleaning, it could cause an injury. - Page 32 MAINTENANCE Cleaning the Slim Hard Floor foreign objects, debris and hair from all Rollers of the nozzles using tweezers. Nozzle Press the nozzle release button to remove the nozzle from the extension pipe or product body. Slide the brush back into the nozzle until it clicks into place.
- Page 33 MAINTENANCE Use a damp towel or cloth to remove any hair from all Rollers of the nozzles using remaining foreign objects and dust from the tweezers. brush and the bottom of the nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.
-
Page 34: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service Operation Symptoms Possible Cause & Solution The appliance does not Battery is fully discharged. operate. • Charge the battery. Appliance is turned off. • Press the Power button to turn on the appliance. Suction power is too Dust bin is full of dust. - Page 35 LG customer information centre for service. repeatedly. Foreign object is in the product body, extension pipe, inlet port or nozzle.
- Page 36 TROUBLESHOOTING Symptoms Possible Cause & Solution The mop pad Foreign object is between mop attachment plate and mop pads. attachment plate does • Remove foreign objects from the mop nozzle attachment plate and press not rotate. the power button to resume use. There is no water Water tank is empty.
- Page 37 Memo...
- Page 38 Memo...
- Page 39 Memo...