Advertisement
4.0 MECHNICAL INSTRUCTIONS
1. Back side of the set as shown in Fig.1
Remove the screws on the base cover.
Fig.1
2. Soldered short pattern for laser diode as shown in Fig.2
Fig.2
3.
Disconnect the flex from TFT LCD.
Remove the screws on button PCB board as shown in Fig.3
Fig.3
Disconnect the flex from DVD loader & PCB boards.
4.
Then it will able to remove DVD loader and main PCB
and Lithium battery as shown in Fig.4
Fig.4
5. Remove speaker grill and screw cushion on display frame
6. Remove the screws on display frame as shown in Fig.6.
soldered
7.
Remove the screws on IF board as shown in Fig.7.
8. Disconnect the flex between IF board, power board and TFT LCD.
Remove the screws on IF board, power board and TFT LCD.
As shown in Fig.8.
as shown in Fig.5
Fig.5
Fig.6
Fig.7
Fig.8
Advertisement
