Samsung SSC-21WEB Installation Manual page 15

4) MOUNTING BRACKET(SBR-120)
! Overview
MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall.
@ Installation
• Choose an installation site that can sufficiently support the weight of the equipments to be
installed.
• Mark the mounting holes using the house mount bracket as a template, then drill pilot
holes (8 mm diameter, 45 mm depth), and then install and secure the plastic anchors.
At this time, cut away all exposed protrusions.
• Align the housing mount bracket over the plastic anchor holes, then firmly fasten the
tapping screws.
• Install the housing according to the following CAMERA HOUSING installation method.
# Specification
Use : Indoor
Installation : Wall
Dimensions : 75 ✕ 115 ✕ 240(W ✕ H ✕ D)
Weight : 500g
Operating Temperature : -10 °C ~ 50 °C
$ Accessories
Hexagon Socket Head Cap Screws ---------- 2
L- WRENCH ------------------------------------1
SCREW ------------------------------------------ 4
Plastic Anchor ----------------------------------- 4
Tapping Screw(M5 ✕ J5) ---------------------- 4
14