Table of Contents
Advertisement
Microphone Function (option)
The microphone enables the user to mix in his or her vocals to
sing-along with the music.
Preparation
Plug the microphone with a 3.5mm mic jack into microphone terminal.
Connecting Headphones
You can connect a set of headphones to your micro component
system so that you can listen to music or radio programmes without
disturbing other people in the room. The headphones must have a 3.5
mm jack or appropriate adapter.
Connect the headphones to the Phones connector on the front panel
(or top right coner).
Result:
The loudspeakers are no longer used for sound output .
Prolonged use of headphones at a high volume may
damage your hearing.
Connecting to an External Source
The auxiliary input can be used to take advantage of the sound
quality of your micro component system when listening to other
sources.
Example:
A television
A video disc player
A DAT or DCC cassette player
A Hi-Fi stereo video cassette recorder
To connect an external source, the source to be connected
must have an audio output. In addition, you must have an
RCA connection cable.
1
Before connecting the external source, set the system to standby
mode and disconnect it and the external source from the mains.
2
Connect the audio cable to the rear of the system.
Connect the...
Red jack
White jack
For optimum sound quality, do not invert the right and left
channels.
3
Press On/Standby switch it on.
4
Press AUX.
Result:AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume
Equalizer
S. BASS
Example:
You can watch a film and take advantage of stereo
sound as if you were at the cinema (provided that the
original sound track is in stereo).
3
CD Rep eat
A
B
Band
TUNER
TAPE
Timer
Clock
Down
Mute
To the connector marked...
R (right)
L (left)
On/Standby
Vo lum e
CD
AUX
AUX
EQ
4
Tuning Mode
Up
S.Bass
15
GB
Hide quick links:
Advertisement
Table of Contents
