Table of Contents
Advertisement
32
GETTING TO KNOW YOUR VEHICLE
NOTE:
The seatback may be locked, if it is, it will be necessary to
use the recliner handle to unlock the back before folding
into the upright position.
Pull Strap
5.
Replace the plastic storage bin into the storage area.
6.
To position the floor panel back into its original state,
grab the bottom corner and extend it outward.
Extend Panel
7.
Lay the floor panel flat and push down until it clicks
into position.
Push Down To Lock
8.
Readjust the front seat as needed, and replace the
floor mat (if equipped).
WARNING!
In a collision, you or others in your vehicle could be
injured if seats are not properly latched to their floor
attachments. Always be sure the seats are fully
latched.
Sitting in a seat with the head restraint in its lowered
position could result in serious injury or death in a
collision. Always make sure the head restraints are in
their upright positions when the seat is to be occu-
pied.
P
A
(F
OWER
DJUSTMENT
RONT
I
E
F
QUIPPED
Some models may be equipped with an eight-way power
seat for the driver. The power seat switches are located on
the outboard side of the seat. The switches control the
movement of the seat cushion and the seatback.
Driver Power Seat Switches
1 — Seat Switch
2 — Seatback Switch
3 — Lumbar Switch
WARNING!
Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collision and serious
injury or death.
S
) —
EATS
(Continued)
Advertisement
Table of Contents
