Advertisement
Quick Links
Advertisement
Related Manuals for Lenovo P40w-20
Summary of Contents for Lenovo P40w-20
- Page 1 P40w-20 Simplified service manual for dismantling Model Name: Lenovo P40w-20...
-
Page 2: Exploded Diagram
Exploded Diagram... - Page 3 1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally.
- Page 4 2. Appropriate tools Select the Appropriate tools for disassembly and re-assembly. Phillips screwdriver (#2) C/D disassembly tool Gloves or soft cloth...
- Page 5 3. Disassembly SOP Put the monitor on softly curved surface and the Curvature should be follow to the monitor. (such as the EPE on original packing) Push the button to release the stand Remove the screw * 4pcs Tool : Screwdriver #2 Use the C/D disassembly tool into gap of the unit cover and force up to release the unit...
- Page 6 Release 2 connectors from the Use the C/D disassembly tool to release Rear cover hook from disassemble hole on bottom Remove the chassis screw. Remove All tape and light bar connector Tool : Screwdriver #2 Hold the main chassis to release the Panel cable then to take out the chassis Take out the mylar sheet from...
- Page 7 Remove PCB screw and Peel off the tape of all. Tool : Screwdriver #2 Take out PCB and Peel off all Thermal pads、Gasket、mylar. Remove Screws to take out heat-sink Tool : Screwdriver #2 Remov screws to take out the Front bezel. Tool : Screwdriver #2 Remove screws to take out the Hub module...
- Page 8 Take out Spring and release screws Tool : Screwdriver #2 With the force as red-arrow showing to open front cover and back cover. Take out the PCB and shielding...