Traxxas TRX4 Scale and Trail Crawler 82046-4 Owner's Manual page 33

Setting Lock
Once you've adjusted all of these settings the way you like them, you
may want to disable the Multi-Function knob so none of your settings
can be changed. This is especially handy if you operate multiple vehicles
with a single transmitter via Traxxas Link
Multiple Settings and the Multi-Function Knob
It is important to note that settings made with the Multi-Function
knob are "overlaid" on top of each other. For example, if you assign the
Multi-Function to adjust Steering Percentage and set it for 50%, then
reassign the knob to control Steering Sensitivity, the transmitter will
"remember" the Steering Percentage setting. Adjustments you make to
Steering Sensitivity will be applied to the 50% steering throw setting
you selected previously. Likewise, setting the Multi-Function knob to
"disabled" will prevent the knob from making further adjustments, but
the last setting of the Multi-Function knob will still apply.
TRAXXAS LINK MODEL MEMORY
Traxxas Link Model Memory is an exclusive, patent-pending feature of
the TQi transmitter. Each time the transmitter is bound to a new receiver,
it saves that receiver in its memory, along with all the settings assigned
to that receiver. When the transmitter and any bound receiver are
switched on, the transmitter automatically recalls the settings for that
receiver. There is no need to manually select your vehicle from a list of
model memory entries.
Model Lock
The Traxxas Link Model Memory feature can store up to thirty models
(receivers) in its memory. If you bind a thirty-first receiver, Traxxas Link
Model Memory will delete the "oldest" receiver from its memory (in
other words, the model you used the longest time ago will be deleted).
Activating Model Lock will lock the receiver in memory so it cannot be
deleted.
You may also bind multiple TQi transmitters to the same model, making
it possible to pick up any transmitter and any previously bound model
in your collection and simply turn them on and drive. With Traxxas Link
Model Memory, there is no need to remember which transmitter goes
™ Model Memory. with which model, and there is never a need to have to select any model
from a list of model memory entries. The transmitter and receiver do it
all for you automatically.
To activate Model Lock:
1. Switch on the transmitter and receiver you wish to lock.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET. The status LED will blink green in single-flash intervals.
5. Press SET once. The status LED will blink red once repeatedly.
6. Press MENU once. The status LED will blink red twice repeatedly.
7. Press SET. The LED will blink rapidly green. The memory is now locked.
Press and hold MENU to return to driving mode.
Note: To unlock a memory, press SET twice at step 5. The LED will blink
rapidly green to indicate the model is unlocked. To unlock all models,
press MENU twice at step 6 and then press SET.
To delete a model:
At some point, you may wish to delete a model you no-longer drive
from the memory.
1. Switch on the transmitter and receiver you wish to delete.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET once. The status LED will blink green once repeatedly.
5. Press MENU once. The status LED will blink green twice repeatedly.
6. Press SET. The memory is now selected to be deleted. Press SET to
delete the model. Press and hold MENU to return to driving mode.
TQ ADVANCED TUNING GUIDE
i
TRX-4 • 33