Kenmore 795.7204 Series Use & Care Manual page 12

REMOVING AND REPLACING REMOVING AND REPLACING
REFRIGERATOR DOORS REFRIGERATOR DOORS
REMOVING AND REPLACING
WARNING
REFRIGERATOR DOORS
Excessive Weight Hazard:
Excessive Weight Hazard:
Use two or more people to remove and install the
Use two or more people to remove and install the
Excessive Weight Hazard:
refrigerator doors. Failure to do so can result in back or
refrigerator doors. Failure to do so can result in back or
other injury.
other injury. Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
WARNING
Electrical Shock Hazard
Electrical Shock Hazard
• Disconnect the electrical supply to the refrigerator
Electrical Shock Hazard
• Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
before installing. Failure to do so could result in
• Disconnect the electrical supply to the refrigerator
serious injury or death.
serious injury or death.
before installing. Failure to do so could result in
serious injury or death.
• Do not put hands, feet or other objects into the air
• Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You
vents or bottom of the refrigerator. You may be
• Do not put hands, feet or other objects into the air
may be injured or receive an electrical shock.
injured or receive an electrical shock.
vents, base grille, or bottom of the refrigerator. You
may be injured or receive an electrical shock.
NOTE: Be careful when you work with the hinge and base
grille. You may be injured.
To remove the left refrigerator door:
NOTE: Be careful when you work with the hinge and base
grille. You may be injured.
On the back of the refrigerator, pull the water tube out of
To remove the left refrigerator door:
the collet fitting on the connector by pressing the fitting
release ring (see picture below).
To remove the left refrigerator door:
On the back of the refrigerator, pull the water tube out of
the collet fitting on the connector by pressing the fitting
On the back of the refrigerator, pull the water tube out of
release ring (see picture below).
the collet fitting on the connector by pressing the fitting
release ring (see picture below).
All manuals and user guides at all-guides.com
WARNING
WARNING
WARNING
WARNING
CAUTION: Before you begin, remove food and bins CAUTION: Before you begin, remove food and bins
from the doors. from the doors.
CAUTION: Before you begin, remove food and bins
(2)
from the doors.
(2)
(3)
(5)
(3)
(5)
(6)
(7)
(6)
(7)
(8)
1. Open the door. Remove the top hinge cover screw (1).
1. Open the door. Remove the top hinge cover screw (1).
Lift up the cover (2).
Lift up the cover (2).
1. Open the door. Remove the top hinge cover screw (1).
2. Remove the cover.
2. Remove the cover.
Lift up the cover (2).
3. Pull out the tube (3).
3. Pull out the tube (3). 2. Remove the cover.
4. Disconnect all wire harnesses (4).
3. Pull out the tube (3).
4. Disconnect all wire harnesses (4).
5. Remove the grounding screw (5).
4. Disconnect all wire harnesses (4).
5. Remove the grounding screw (5).
6. Rotate hinge lever (6) counterclockwise.
5. Remove the grounding screw (5).
6. Rotate hinge lever (6) counterclockwise. Lift the top
Lift the top hinge (7) free of the hinge lever latch (8).
6. Rotate hinge lever (6) counterclockwise. hinge (7) free of the hinge lever latch (8).
CAUTION: When lifting the hinge free of the latch, be
Lift the top hinge (7) free of the hinge lever latch (8).
CAUTION: When lifting the hinge free of the latch,
careful that the door does not fall forward.
CAUTION: When lifting the hinge free of the latch, be
be careful that the door does not fall forward.
7. Lift the door from the middle hinge pin and remove the
careful that the door does not fall forward.
7. Lift the door from the middle hinge pin and remove the
door.
7. Lift the door from the middle hinge pin and remove the
door.
door.
8. Place the door, inside facing up, on a non-scratching
8. Place the door, inside facing up, on a non-scratching
surface.
8. Place the door, inside facing up, on a non-scratching
surface.
surface.
To remove the right refrigerator door:
To remove the right refrigerator door:
To remove the right refrigerator door:
1. Open the door. Remove the top hinge cover screw (1).
1. Open the door. Remove the top hinge cover screw (1).
1. Open the door. Remove the top hinge cover screw (1).
Lift up the cover (2).
Lift up the cover (2).
Lift up the cover (2).
2. Remove the cover.
2. Remove the cover.
2. Remove the cover.
3. Rotate the hinge lever (3) clockwise. Lift the top hinge
3. Rotate the hinge lever (3) clockwise. Lift the top hinge
3. Rotate the hinge lever (3) clockwise. Lift the top hinge
(4) free of the hinge lever latch (5).
(4) free of the hinge lever latch (5).
(4) free of the hinge lever latch (5).
CAUTION: When lifting the hinge free of the latch, be
CAUTION: When lifting the hinge free of the latch, be
CAUTION: When lifting the hinge free of the latch, be
careful that the door does not fall forward.
careful that the door does not fall forward.
careful that the door does not fall forward.
4. Lift the door from the middle hinge pin and remove the
4. Lift the door from the middle hinge pin and remove the
4. Lift the door from the middle hinge pin and remove
door. door.
the door.
5. Place the door, inside facing up, on a non-scratching 5. Place the door, inside facing up, on a non-scratching
5. Place the door, inside facing up, on a non-scratching
surface.
surface.
surface.
13
13
13
REFRIGERATOR INSTALLATION
REFRIGERATOR INSTALLATION
REFRIGERATOR INSTALLATION
(1)
(1)
(4)
(4)
(8)
(1)
(2)
(1)
(3)
(4)
(3)
(4)
(5)
(5)
(2)