Table of Contents
Advertisement
OPERATING THE RECEIVER
3.3 Banner Duration
When you switch channels, an information banner will be
shown for a few seconds.
You can select for how long the banner will be shown.
●
Select "Banner Duration" in the Preference menu.
●
Select the banner time you want by using
Time ranges: 0, 3, 5, 10 and 15 seconds.
●
Press the SELECT (
) key for confirmation.
●
Press the RETURN (
) key to cancel your work or go
back to the previous menu.
●
Press Exit to exit the menu.
N N o o t t e e
: Each selectable time items has meaning of the
interval time during a channel banner stays on
changed channel screens.
3.4 Channel Change Mode
Using this menu, select channel group mode you want
to see.
●
Select "Channel Change Mode" in the Preference
menu.
●
Select the channel mode you want by using
or
key.
Channel mode: All, TV, Radio and Favorite.
●
Press the SELECT (
) key for confirmation.
●
Press the RETURN (
) key to cancel your work or go
back to the previous menu.
●
Press Exit to exit the menu.
N N o o t t e e
: In Channel Change mode, you will see only the
channels that you have already set.
ENG-36
or
key.
D
I
G
I
T
A
L
T
E
R
4. System
This menu consists of 5 sub-menus :
Change PIN Code, Region Selection, Status, Signal
Detection, and Factory Reset.
●
Select "System" in the main menu to select the
sub menu.
●
Select the sub menu from the System menu by
pressing the
or
SELECT (
) key.
4.1 Change PIN Code
From here you can change the PIN Code from the
standard 0000.
DO NOT FORGET IT! Without it, you are not able to
access to any of the functions where the code is
required.
You can change password for Parental Rating and
Channel Block simultaneously.
●
Select "Change PIN Code" in the System menu.
●
Input the Current PIN Code using Numerical key, then
press the SELECT (
New PIN Code. (The factory preset PIN Code : 0000.)
●
Input a New PIN Code using NUMERICAL key, then
press the SELECT (
Confirm PIN Code.
●
To confirm, you need to enter the New PIN Code again.
Please remember the PIN Code should be a 4 digit numerical value.
●
Press Exit to exit the menu.
N N o o t t e e
: If you forget the PIN Code, contact your dealer or service provider.
Once you change password, please do not forget and keep well.
R
E
S
T
R
I
A
L
H
D
T
V
R
E
OPERATING THE RECEIVER
key, then press the
) key or
key to move to
) key or
key to move to
C
E
I
V
E
R
ENG-37
Advertisement
Table of Contents
