Installation Example Using The Original Mounting Bracket - Alpine iLX-207 Installation Manual

ML.book Page 4 Wednesday, November 30, 2016 3:00 PM
Microphone
Cable clamp
(Sold separately)
Installation example using the Original
Mounting Bracket
1
Mount the original mounting bracket to the unit using
the supplied screws.
Ground Lead*
Chassis
Original Mounting Bracket
Screws (M5 × 8) (Included)
To securely connect the ground lead, use an already installed screw on a
metal part of the vehicle (marked (
vehicle's chassis.
2
Connect all other leads of the unit according to details
described in the "Connections" (page 5).
3
Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking them into
movable parts, such as a seat rail, or by locating them against sharp or
pointed edges.
4
-EN
01GB04X208U-US_EN.fm
Face plate (Included)
)) or a clean, bare metal spot on the
Note on using HDMI Connection Cables
When using HDMI connection cables, secure the cables to the HDMI
Terminals with the supplied HDMI Fixation Bracket.
1
Slide the HDMI Fixation Bracket into the grooves (A).
2
Secure it with the screw (B).
HDMI Terminal
(A)
(B)
ALPINE iLX-207 68-34732Z15-A (EN)
(A)
HDMI Fixation Bracket
(Included)