Samsung D10 Owner's Manual page 16

2
2
CHAPTER 2
Setting up and connecting
Connection option E:
DIRECTV Receiver to TV and A/V receiver
If connection option E best matches your needs, follow these steps:
Make sure your TV, A/V receiver, and DIRECTV Receiver are turned off and unplugged.
1
Connect the RG-6 coaxial cable running from your satellite dish to the SATELLITE IN jack on
2
the back of your DIRECTV Receiver.
Connect the coaxial cable running from your cable TV system or off-air TV antenna to the
3
OFF-AIR IN jack on the back of the DIRECTV Receiver.
Connect the supplied phone cord to a telephone wall jack and to the Phone Line jack on the
4
back of the DIRECTV Receiver.
Matching like colors, connect the supplied A/V cable to the AUDIO OUT and VIDEO OUT
5
jacks on the back of the DIRECTV Receiver.
Connect the other ends of the A/V cables to appropriate audio and video input jacks on your
6
A/V receiver. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs
on your A/V receiver (video out to video in, left audio out to left audio in, right audio out to
right audio in).
Connect another set of A/V cables (not included) to the second set of audio and video output
7
jacks on the back of the DIRECTV Receiver.
Connect the other ends of these A/V cables to the appropriate audio and video input jacks
8
on your TV. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs
on your TV.
(Optional) if your TV and A/V receiver both have S-Video jacks, you can also make the
9
S-Video connections shown in the illustration. This step is optional; it provides improved
picture quality.
Plug in the power cords for your TV, A/V receiver, and DIRECTV Receiver.
10
30
2
2
CHAPTER 2
Setting up and connecting
To watch DIRECTV ® programming
Set your A/V receiver and TV to the appropriate input mode. See the manuals for your
A/V receiver and TV for instructions.)
DIRECTV Receiver
TV
A/V Receiver
31