Cable Information - NEC MultiSync ME431 IR-2 User Manual

Infrared touch
Hide thumbs Also See for MultiSync ME431 IR-2:
Table of Contents

Advertisement

Cable Information

CAUTION:
Use the provided specified cables with this product so as not to interfere with radio and television reception.
For USB, please use a shielded signal cable with ferrite core.
For HDMI and DisplayPort, please use a shielded signal cable.
Use of other cables, adaptors or extenders may cause interference with radio and television reception or
may cause malfunction of the touch sensing.
SUPPLIER'S DECLARATION OF CONFORMITY
• The intended primary use of this product is as an Information Technical Equipment in an office or domestic environment.
• The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
NOTE:
(1) The contents of this manual may not be reprinted in part or whole without permission.
(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should you notice any questionable points, errors
or omissions, please contact us.
(4) The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product,
the actual product shall govern.
(5) Notwithstanding articles (3) and (4), Sharp/NEC will not be responsible for any claims on loss of profit or other matters
deemed to result from using this device.
(6) This manual is commonly provided to all regions so they may contain descriptions that are pertinent for other countries.
4

Advertisement

Table of Contents
loading

Table of Contents