Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable; To Select The Camcorder Mode; Conexión A Una Fuente De Energía - Samsung SC-D93 Owner's Instruction Book

Samsung sc-d93: user guide
Hide thumbs Also See for SC-D93:
Table of Contents

Advertisement

00656D SCD93-US+ESP(01~27)
8/18/03 2:23 PM

ENGLISH

Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
camcorder.
-
The AC Power Adapter and AC cord : used for indoor recording.
-
The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to the
AC cord.
2. Connect the AC cord to a wall socket.
Note
The plug and wall socket type may
differ according to your resident
country.
3. Connect the DC cable to the DC jack
socket of the camcorder. (When the
battery is attached on the set, you
should keep outside the projection of
the DC cable.)
4. Set the camcorder to each mode by
holding down the tab on the power
switch and turning it to the CAM or PLAYER mode.

To select the CAMCORDER mode

If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
If you want to use this unit as a DSC (Digital Still
Camera), set the mode switch to MEMORY
STICK position.
Page 23
Preparación
Conexión a una fuente de energía
Hay dos tipos de fuentes de energía a las que se puede conectar la
videocámara.
-
El adaptador de CA y el cable de CA: se emplean para grabaciones
en interiores.
-
La batería: se emplea para grabaciones en exteriores.
Utilización del adaptador de CA y del cable de CC
1. Conecte el adaptador de CA al cable
de CA.
2. Conecte el cable de CA a una toma
de corriente.
Nota
Es posible que la clavija y la toma de
corriente sean de distinto tipo,
dependiendo de su lugar de
residencia.
3. Conecte el cable de CC al conector
de CC de la videocámara.
(Si la batería está conectada al
equipo, debería dejar fuera la
prolongación del cable de CC.)
4. Ajuste la videocámara pulsando la
lengüeta y colocándola en la
modalidad deseada: CAM o PLAYER.
Selección de la modalidad de videocámara
SI desea utilizar este aparato como
videocámara, ajuste el interruptor de
modalidad en la posición TAPE (cinta).
Si desea utilizar este aparato como cámara
fotográfica digital (DSC), ajuste el interruptor
de modalidad en la posición MEMORY STICK.
ESPAÑOL
23
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd99

Table of Contents