KitchenAid LKUIX335PPS Series Owner's Manual page 22

NOTES:
� Check that the power supply cord is not damaged or pinched
or kinked between the ice maker and the cabinet.
� Check that the water supply line is not damaged or pinched or
kinked between the ice maker and the cabinet.
� Check that the drain line (on some models) is not damaged or
pinched or kinked between the ice maker and the cabinet.
� Check that the ice maker door is not flush with the standard
cabinets to avoid problems with opening the ice maker door.
Standard model
Standard Model Utilities
A Width (for 15ʺ ice maker)
Width (for 18ʺ ice maker)
B Width of outlet location
C Outlet location—distance
from side
D Outlet location—distance
from bottom
E Width of water connection
location
22
15ʺ (38.1 cm) minimum
18ʺ (45.7 cm) minimum
6ʺ (15.2 cm)
1ʺ (2.5 cm)
12ʺ (30.5 cm)
3 1 ⁄ ʺ (8.9 cm)
2
F Height
G Height of outlet location
H Height of water connection
location
I Depth of cabinet (minimum)
e
Recommended electrical connection location
w
Recommended water connection location
Model Utility/Air Flow Slot
Required zone
for utility hole/slot
cutout location
A
7½"
(19.05 cm)
Utility/Air Flow Slot/Cutout Location Zone
Dimension
Diameter of the hole
� Auxiliary pump ice maker models have been designed for flush
install in instances where the power supply, water supply, and
drain are located in adjacent cabinetry.
� For installation of product with utilities behind the ice maker,
flush install may not be achieved.
� Refer to the "Model Utility/Air Flow Slot" illustration, table for
utility/air flow slot cutout location, and paper template for
utility/air flow slot cutout location.
34ʺ (86.4 cm) minimum
34 1 ⁄ ʺ (87.6 cm)
2
maximum
8ʺ (20.3 cm)
9ʺ (22.9 cm)
24ʺ (61.0 cm)
B
D
C
E
7½"
(19.05 cm)
A 14" (35.56 cm)
B 10.5" (26.67 cm)
C 7ʺ (17.8 cm)
D 0.75" (1.9 cm)
E 2ʺ (5.1 cm)