Samsung SCO-2080R User Manual page 12

Operating Your Camera
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.
Select 'BLC' to adjust the area to be
enhanced then adjust the level.
LOW
Notes
• B ecause there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
• W hen dark, the HLC is only activated when a bright light exceeding a specific size in
NIGHT ONLY mode.
• T he HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
• BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
COLOR CCD CAMERA
HLC : Enable the user to change the level,
limit, mask color/tone and area.
22
User Guide
SSNR3
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function
Setup switch so that the arrow indicates 'SSNR3'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR3. Noise is not reduced.
ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can
adjust the noise reduction level.
Notes
• Y ou cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the
EXPOSURE menu is 'OFF'.
• W hen adjusting the noise reduction level in the SSNR3 mode, remember that
the higher the level set, the more the noise level will be reduced, as will the
brightness of the image.
COLOR CCD CAMERA
DC
ATW
OFF
OFF
ON
AUTO
23
User Guide