Honda Accord Sedan 2007 Owner's Manual page 48

Installing a Child Seat
Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
48
Using an Outer Anchor
TETHER STRAP HOOK
ANCHOR
1. After properly securing the child
seat (see page 46 ), lift the head
restraint, then route the tether
strap through the head restraint
legs.
2. Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
3. Tighten the strap according to the
seat maker's instructions.
Using the Center Anchor
TETHER STRAP HOOK
ANCHOR
1. After properly securing the child
seat (see page 46 ), route the
tether strap over the seat-back.
2. Follow steps 2 and 3 from the
previous column.