Honda Accord Sedan 2007 Owner's Manual page 218

Lights
BULB
TAB
V6 models
5. Push the electrical connector onto
the bulb.
6. Turn on the headlights to test the
new bulb.
7. Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
220
Low Beam Headlight
HOLDING CLIPS
1. To change the passenger's side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver's side bulb, turn
the steering wheel to the right.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
3. Pull the inner fender cover away
from the fender and bumper.
4. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
5. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
BULB