Looking After Your Machine - Brushbar - Vax Zoom U87-ZM-B User Manual

Looking After Your Machine – Brushbar
Changing the belt
Switch off your vacuum
cleaner at the main socket
and unplug. Unclip the 2
small wheels from the base
of the vacuum to enable you
to remove the screws from
behind.
Note: The screw for the
height adjuster dial is
located here.
Place the belt by attaching it to the
brushbar and hooking it onto the
metal side.
9
Remove the 9 screws from
the base of the floorhead
cover.
Once the belt has been replaced attach
the brushbar back onto the vacuum.
Remove the floorhead cover.
Attach the floorhead cover, 2 small
wheels and height adjuster dial by
screwing back into place.
Lift the brushbar from the
machine to remove the belt.
Note: To remove debris from
the brushbar see page 8.