Table of Contents
Advertisement
The front seat belt pretensioner system
mainly consists of the following compo-
nents and their locations are shown in the
illustration.
1. Front airbag sensors
2. SRS warning light
3. Front seat belt pretensioner assemblies
4. Airbag sensor assembly
The front seat belt pretensioners are con-
trolled by the airbag sensor assembly. The
airbag sensor assembly consists of a saf-
ing sensor and airbag sensor.
'01 Tacoma U (L/O 0009)
When the front seat belt pretensioners are
activated,
an operating noise may be
heard and a small amount of smoke–like
gas may be released. This gas is harm-
less and does not indicate that a fire is
occurring.
Once the front seat belt pretensioners
have been activated, the seat belt retrac-
tors remain locked.
CAUTION
Do not modify, remove, strike or open
the front seat belt pretensioner as-
semblies, airbag sensor or surround-
ing area or wiring. Doing any of
these may cause sudden operation of
the front seat belt pretensioners or
disable the system, which could re-
sult in death or serious injury.
Failure to follow these instructions
can result in death or serious inju-
ries.
2001 TACOMA (OM35766U)
NOTICE
Do not perform any of the following
changes
without
consulting
your
Toyota
dealer.
Such
changes
can
interfere with proper operation of the
front seat belt pretensioners in some
cases.
z Installation
of
electronic
devices
such as a mobile two–way radio,
cassette tape player or compact
disc player
z Repairs on or near the front seat
belt pretensioner assemblies
z Modification of the suspension sys-
tem
z Modification of the front end struc-
ture
z Attachment of a grille guard (bull
bar, kangaroo bar, etc.), snowplow,
winches or any other equipment to
the front end
z Repairs made on or near the front
fenders, front end structure or con-
sole
37
Advertisement
Chapters
Table of Contents
