CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
98
'01 Tacoma U (L/O 0009)
Rear outside position—
1. Lightly push down on the top sur-
face of the anchor bracket cover
with the symbol mark shown in the
illustration, then pull it forward to
remove.
2001 TACOMA (OM35766U)
Routing
device
2. Fix the child restraint system with
the seat belt.
Route
the
top strap
through the
routing device as shown in the il-
lustration.
For instructions on installing the child re-
straint system, see "Child restraint" in this
section.
CAUTION
Make
sure
the
top
strap
is
twisted.
not