Westinghouse WVE6515SD User Manual page 13

• Set the desired pre-heat temperature, by rotating
your oven temperature selector. When the indicator
light goes out the oven has reached the desired
preset temperature, place your food into the oven.
Pre-heating "grill"
• Preheat the grill for at least 3 minutes to obtain best
results. This will help to seal the natural juices of
steak, chops and other meats for a better flavour.
Operating the electronic clock
General features
The oven is equipped with an electronic clock that can be
used to turn the oven off automatically. The
function automatically turns the oven off after a set
amount of time.
NOTE: Your touch control clock only operates with your
main oven.
Setting the time
Before the appliance can be used, the time must be set.
After the appliance has been electrically connected,
"12:00" will be displayed and the
To set the time of day in hours and minutes, touch the
or symbols. Refer to the diagram above.
5 seconds after the last change, the clock symbol will
disappear, confirming the time has been set. Once the
time has been entered, the clock advances minute by
minute.
NOTE: The clock has a 24 hour display.
Changing the time of day
1. Press until the "Clock" indicator symbol
begins flashing.
2. To set the time of day, press the
while the "Clock" indicator symbol
3. After 5 seconds from the last change, the "Clock"
indicator symbol will disappear, confirming the
time has been set.
Setting the minute minder
1. Press until the "Timer" indicator symbol
begins flashing.
2. Set the countdown time by using
while the "Timer" indicator symbol
3. After 5 seconds from the last change, the "Timer"
4.
5.
NOTE: This feature has no effect on the oven operation.
With the minder operating, the time of day cannot be
displayed.
Setting the cooking duration
1.
2.
3.
4.
NOTE: Do not forget to add pre-heating time if necessary.
To check or cancel settings
1.
clock icon will flash.
2.
On completion of cooking
When the set time has elapsed, the oven will turn off, the
timer will beep and the
1.
2.
or symbols
is flashing.
Switching the clock display ON and OFF
1.
2.
NOTE: If a timer mode is set, then it is not possible to
switch the display off.
and symbols
is flashing.
indicator symbol will stop flashing, confirming the
timer has been set. The countdown time remaining
will appear on the display.
Once the set time has elapsed, a beeper will sound
for 1 minute. The time indication "0.00" and a flashing
"Timer" indicator symbol
To stop the beeper, press
Select the desired oven
The oven indicator light will appear and the heating
source will switch on.
Press until the
begins flashing.
Set the cooking duration by using
while the indicator symbol
After 5 seconds from the last change, the
indicator symbol will stop flashing, and the time of
day will be displayed.
To check your settings, press
indicator symbol flashes next to the mode
( , etc) that you want to display. After 5
seconds from the last change, the indicator will stop
flashing and the time of day will be displayed.
To cancel a setting, press
symbol flashes next to the setting to be cancelled.
Press and hold and symbols together until the
setting is cleared.
Turn the and
off position.
Press or symbols or
from beeping.
Press together and symbols for 3 seconds to
switch off the display.
Press together and symbols for 3 seconds to
switch the clock display on again.
will appear on the display.
, symbols or .
and .
indicator symbol
or symbols
is flashing.
until the
until the indicator
indicators will flash.
controls to the
to stop the clock
USING YOUR OVEN
13