Advertisement
Available languages
Available languages
Using the Refrigerator
ADJUSTABLE TEMPERATURE DIAL
Refrigerator Section
Your refrigerator will automatically maintain the
temperature level you select. The temperature control
dial has 7 settings. 1 is the warmest. 7 is the coldest. At
first, set the dial to 4 and allow 24 hours to pass before
adjusting the temperature to your needs.
To adjust the temperature
range in the cold setting, turn
the temperature dial. For
normal operating conditions,
keep the dial on 4. For your
convenience, the factory
presets the control at normal
operating conditions.
NOTE: If the refrigerator has been placed in a horizontal
or tilted position for any period of time wait 24 hours
before plugging the unit in.
Freezer Section
Your freezer compartment is equipped with adjustable
temperature control. For your convenience, temperature
is preset by the factory to the MID setting. There is also
an option to adjust the settings, either to MIN or to MAX.
MIN
MID
REFRIGERATOR SECTION
INTERIOR LIGHT
Your refrigerator is equipped with an interior light in the
refrigerator section for you to easily locate your food.
DANGER
RISK OF FIRE
OR EXPLOSION
Flammable refrigerant used. Do not use mechanical
devices to defrost refrigerator or freezer. Do not
puncture refrigerant tubing.
FROST- FREE REFRIGERATOR-
FREEZER
You should never need to defrost your freezer, as it
automatically defrosts any ice build-up that may occur.
49-1000695 Rev. 1
4
MAX
REFRIGERATOR INTERIOR SHELVES
(Shelves may vary by model)
The shelves of your refrigerator were designed with you
in mind. Their varied adjustability allows you to satisfy
your personal storage needs.
To remove or adjust a
full-width slide-out shelf:
1. Gently tilt the shelf up
and slide forward until
the shelf has been
completely removed.
2. To replace the shelf, select the desired setting and
gently slide the shelf back until it rests in the locking
position.
CRISPERS AND CRISPER COVER
To remove and install the crisper:
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper properly in
position and gently sliding it back into place.
Your refrigerator may be equipped
with a slide control to raise or
lower the humidity levels or your
crispers. This feature will increase
the storage life of your fruits and
vegetables. Simply adjust the
controls to the appropriate setting
for items you are storing in the
crispers. Low settings allow moist air to exit the crisper,
for optimum storage of fruit and/or vegetables that have
skins. High settings retains moist air in the crisper, for
optimum storage of leafy fresh vegetables.
REMOVING OR REPLACING THE
CRISPER COVER
1. Carefully grasp the crisper
cover and slide out to
remove.
2. To replace, slide the rear
of the crisper cover into the
right and left slots above
the crisper area and gently
slide back into place.
5
Advertisement
