Table of Contents
Advertisement
Quick Links
Record All Information and attach sales
receipt here for future reference:
Purchase Date:__________________________
Serial #: ________________________________
TABLE OF CONTENTS
Safety Guidelines/Definitions ........................... 2
Consumer Safety Information .......................... 2
Important Safety Instructions .......................... 2
Safety Features ............................................... 6
Specifications .................................................. 6
Assembly instructions ..................................... 7
Spray Nozzle Selection .................................... 9
Before Operation ............................................. 9
Engine and Pump Features ........................... 10
Operating Connections.................................. 10
Operating Instructions ................................... 11
IMPORTANT: Please make certain that the person who is to use this equipment carefully reads
and understands these instructions before operating.
06/26/2018
PRESSURE WASHER
OPERATION MANUAL
Start-Up Procedure ....................................... 11
Chemical Injection ......................................... 11
Cleaning Techniques ..................................... 12
End of Cleaning Operation ............................ 12
Maintenance .................................................. 13
Storage .......................................................... 14
Warranty ........................................................ 15
Troubleshooting Guide .................................. 16
Français ......................................................... 17
Español .......................................................... 33
PRINTED IN CHINA
for model EPW1792500.01
Part No. E111399//Rev. 2
Advertisement
Table of Contents
Related Manuals for Excell EPW1792500.01
Summary of Contents for Excell EPW1792500.01
-
Page 1: Table Of Contents
PRESSURE WASHER OPERATION MANUAL for model EPW1792500.01 Record All Information and attach sales receipt here for future reference: Purchase Date:__________________________ Serial #: ________________________________ TABLE OF CONTENTS Start-Up Procedure ........11 Safety Guidelines/Definitions ......2 Chemical Injection ......... 11 Consumer Safety Information ......2 Cleaning Techniques ........ -
Page 2: Safety Guidelines/Definitions
SAFETY GUIDELINES - DEFINITIONS • SAVE ALL INSTRUCTIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. DANGE R CAUTIO N Indicates an imminently hazardous situation which, if not... - Page 3 IMPORTANT SAFETY INSTRUCTIONS (CONT.) • SAVE ALL INSTRUCTIONS RISK OF EXPLOSION FOR FIRE DANGE R WHAT CAN HAPPEN HOW TO PREVENT IT • Shut off engine and allow it to cool before adding fuel to • Spilled gasoline and its vapors can become ignited from the tank.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS (CONT.) • SAVE ALL INSTRUCTIONS RISK OF INJURY FROM SPRAY DANGE R WHAT CAN HAPPEN HOW TO PREVENT IT • High-velocity fluid spray can cause objects to break, • Always wear ANSI-approved z87.1 safety glasses. propelling particles at high speed. Wear protective clothing to protect against accidental •...
- Page 5 IMPORTANT SAFETY INSTRUCTIONS (CONT.) • SAVE ALL INSTRUCTIONS RISK OF HOT SURFACES WA RNING WHAT CAN HAPPEN HOW TO PREVENT IT • During operation, touch only the control surfaces of the • Contact with hot surfaces, such as engine's exhaust pressure washer.
-
Page 6: Safety Features
SAFETY FEATURES • SAVE ALL INSTRUCTIONS THERMAL RELIEF VALVE LOW-OIL SHUTDOWN A thermal relief valve is provided to protect the The unit is equipped with a low oil sensor. If the pump from overheating if the spray gun is engine oil level becomes lower than required, closed for an extended length of time or the the pressure washer will automatically shut off. -
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS • SAVE ALL INSTRUCTIONS 1. Place the unit on its back and insert wheel FIG 1 axle into front tube (FIG 1). Use (1) M6 washer and (1) M6 x 15mm long hex head screw to assemble wheel axle to frame M6 X 15mm hex head using the supplied open-end wrench. - Page 8 ASSEMBLY INSTRUCTIONS (CONT.) • SAVE ALL INSTRUCTIONS 5. Assemble the lower gun hook using (1) M6 x 45mm long socket head cap screw, (1) M6 nut, and the supplied hex wrench and open-end wrench (FIG 9). Tighten securely (FIG 10). FIG 9 FIG 10 6.
-
Page 9: Spray Nozzle Selection
BEFORE OPERATION • SAVE ALL INSTRUCTIONS NOTE: The engine and pump on your FUEL EXCELL™ Pressure Washer will often have Fill the tank with clean, fresh unleaded improved performance after a break-in automotive gasoline. (See Figure 1). Regular period of several hours. -
Page 10: Engine And Pump Features
ENGINE AND PUMP FEATURES - FIGURE 1 • SAVE ALL INSTRUCTIONS OUTLET SIPHON CONNECTION INJECTOR FUEL FILL INLET AIR FILTER CONNECTION THERMAL RELIEF VALVE THROTTLE LEVER OIL FILL CHOKE LEVER OIL DRAIN FUEL ON/OFF RECOIL ENGINE STARTER ON/OFF SWITCH OPERATING CONNECTIONS •... -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS • SAVE ALL INSTRUCTIONS START-UP PROCEDURE 4. Adjust the throttle lever as necessary (half throttle is recommended for starting). 1. Ensure water supply is connected and 5. Turn the engine on/off switch to the “ON” turned on. position. 2. -
Page 12: Cleaning Techniques
CLEANING TECHNIQUES • SAVE ALL INSTRUCTIONS When cleaning with the pressure washer, 2. Allow chemical to remain on the surface many cleaning tasks can be solved with water for a short time before rinsing. alone, but for most tasks it is advantageous to 3. -
Page 13: Maintenance
MAINTENANCE • SAVE ALL INSTRUCTIONS CONNECTIONS WATER SCREEN Connections on pressure washer hoses, gun The pressure washer is equipped with a water and spray wand should be cleaned regularly inlet screen to protect the pump. If the screen and lubricated with silicon grease to prevent is not kept clean, it will restrict the flow of leakage and damage to the o-rings. -
Page 14: Storage
STORAGE • SAVE ALL INSTRUCTIONS PUMP STORAGE ENGINE STORAGE If you must store your pressure washer in a When the pressure washer is not being location where the temperature is below 32°F, operated or is being stored more than one you can minimize the chance of damage to month, follow these instructions: your machine by utilizing the following... -
Page 15: Warranty
LIMITED WARRANTY • SAVE ALL INSTRUCTIONS Always specify model number when contacting the manufacturer. We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied. MAT Industries, LLC warrants this pressure washer and any parts thereof, to be free from defects in material and workmanship for two (2) years (90 days for commercial use or for reconditioned unit) from the date of first purchase from an authorized dealer, provided that the product has been properly maintained and operated in accordance... -
Page 16: Troubleshooting Guide
TROUBLESHOOTING GUIDE • SAVE ALL INSTRUCTIONS Problem Cause Correction Engine will not start or 1. Low-oil shutdown. 1. Ensure engine oil is at proper level stops while operating 2. Engine switch not in the “ON” position. 2. Turn switch to "ON" position 3.