Table of Contents
Advertisement
3.
Reboot to Windows
Failed Hard Drive Member
1.
Power off.
2.
Replace the failed hard drive with a new one that is of equal or greater capacity.
3.
Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4.
Select the port of the destination disk for rebuilding, and then press Enter.
5.
Exit IRST Option ROM, reboot to Windows
6.
When prompted to rebuild the RAID volume, click Yes.
7.
The Intel
®
the new hard drive and select Rebuild to this Disk. The Rebuild Wizard will be
launched which will guide you through the process of rebuilding to the new hard
drive.
110
RAID Configuration
; the rebuild will occur automatically.
®
1.
Create RAID Volume
2.
Delete RAID Volume
"Degraded" volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system.
[
DISK / VOLUME INFORMATION
RAID Volumes :
Select the port of the destination disk for rebuilding (ESC to exit):
None defined.
Port Drive Model Serial #
1
XXXX-XXXXXXXX
Physical Devices :
Port Device Model
Serial #
1
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
[ ↑↓] - Previous/ Next
2
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
[ ↑↓] - Select
[ESC] - Exit
Rapid Storage Technology application will be launched. Right-click
[
MAIN MENU
]
4.
Recovery Volume Options
[
DEGRADED VOLUME DETECTED
]
4.
Recovery Volume Options
5.
Exit
]
Size
XXXXXXXXXXXXXX
Size Type/Status (Vol ID)
XXX.XGB
Non-RAID Disk
[ENTER] - Select
[ESC] - Exit
XXX.XGB
Non-RAID Disk
[ENTER] - Select Menu
.
®
XXX.XGB
Advertisement
Table of Contents
