Starting A Warm Engine; Shifting - Yamaha YZ65J Owner's Manual

Operation and important riding points

Starting a warm engine

Follow the same procedure as for
starting a cold engine with the excep-
tion that the starter (choke) is not re-
quired when the engine is warm.
Instead, start the engine with the throt-
tle slightly open.
TIP
If the engine does not start after sever-
al kicks, try again with the throttle 1/4
to 1/2 open.
6
EAU16661

Shifting

6
5
4
1 3
2
N
1
1. Gear positions
2. Shift pedal
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the il-
lustration.
TIP
To shift the transmission into the neu-
tral position (
down repeatedly until it reaches the
end of its travel, and then slightly raise
it.
NOTICE
 Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
the transmission.
 Always use the clutch while
changing gears to avoid dam-
aging the engine, transmission,
6-2
2
), press the shift pedal
EAU16674
ECA10261