Yamaha YZ65J Owner's Manual page 39

turn of the adjusting nut, dis-
tance A is changed by 1.5
mm (0.06 in).
1. Distance A
Spring preload:
Minimum (soft):
Distance A = 205.5 mm (8.09 in)
Standard:
Distance A = 199.0 mm (7.83 in)
Maximum (hard):
Distance A = 195.0 mm (7.68 in)
8. Tighten the locknut to the speci-
fied torque. NOTICE: Always
tighten the locknut against the
adjusting nut, and then tighten
the locknut to the specified
torque.
[ECA10122]
Tightening torque:
Locknut:
30 N·m (3.0 kgf·m, 22 lb·ft)
9. Install the rear frame assembly as
shown, and then tighten the rear
frame bolts to the specified
torque.
Instrument and control functions
1
10. Install the muffler, and then tighten
11. Place the panels in their original
12. Tighten the clamp bolt.
13. Install the seat.
Rebound damping force
To increase the rebound damping
force and thereby harden the rebound
damping, turn the adjusting screw in
direction (a). To decrease the rebound
4-13
Tightening torque:
Rear frame bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
the muffler bolt to the specified
torque.
Tightening torque:
Muffler bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
position, and then install the bolts.
4