Maintenance And Care; Precautions And Tips - Hotpoint ENXTY 19 FW O3 TK Series Operating Instructions Manual

2-door fridge
Table of Contents

Advertisement

Available languages

Available languages

are corked or hermetically sealed in the freezer because they
GB
could break.
• The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator compartment
(for example: Kg/24h: 4).
• In order to obtain a greater amount of space in the freezer
compartment, you may remove the bins (except the lowest
bin and the special COOL CARE ZONE bin, which has an
adjustable temperature) and place the food directly onto the
evaporator plates.
! If the room temperature drops below 14°C for an extended
period of time, the ideal temperature will not be reached in the
freezer compartment and food preservation will be reduced.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the freezer,
ensuring that foods are conserved for at least 9 -14 hours.

Maintenance and care

Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
1. Press the ON/OFF button to switch off the appliance.
2. Pull the plug out of the socket.
! If this procedure is not followed, the alarm may sound. This
alarm does not indicate a malfunction. To restore normal
operation, hold the ON/OFF button down for more than two
seconds. To disconnect the appliance, follow points 1 and 2
above.
I Care function
The I Care function can be activated to optimise energy
consumption while maintaining the cooling performance of the
product.This function maximises the amount of energy saved.
Under these conditions, the display remains off even when
the door is opened. The function is activated by pressing and
holding the super freezer and FRZ (+) buttons simultaneously
for at least 6 seconds. Once the function has been activated,
all LEDs will light up for 2 seconds to confirm activation, and
the temperature setting of +5, -18 will appear on the display.
The display switches off after 5 seconds. To change the
temperature, simply press the + and – buttons until you have
reached the desired temperature.However, the I Care function
can also be disabled by switching the product off using the
ON/OFF button. When it is switched back on, the I Care will be
disabled.In humid environments, when the I Care function is
enabled, slight condensation may form on the appliance door;
normal operating conditions are restored when the function is
disabled.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals
may be cleaned using a sponge that has been soaked in
lukewarm water and bicarbonate of soda or neutral soap. Do
not use solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water
and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
8
All manuals and user guides at all-guides.com
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
Replacing the led lighting*
Thanks to the powerful light it emits, the new dual LED lighting
system offers a clear view of all foods, with no shadowy areas.
If the LEDs need to be replaced, please contact the Technical
Assistance Service.

Precautions and tips

! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE.
General safety
• The appliance was designed for domestic use inside the
home and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products
by adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist
hands and feet.
• Do not touch the internal cooling elements: this could cause
skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the
mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the
appliance and disconnect it from the electrical supply. It is not
sufficient to set the temperature adjustment knobs on ON/OFF
(appliance off) to eliminate all electrical contact.
• In the case of a malfunction, under no circumstances should
you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or further
malfunctioning of the appliance.
• Do not use any sharp or pointed utensils or electrical
equipment - other than the type recommended by the
manufacturer - inside the frozen food storage compartments.
• Do not put ice cubes taken directly from the freezer into your
mouth.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack of
experience and knowledge unless they have been given

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enxty 19 x f o3 tk series

Table of Contents