Table of Contents
Advertisement
Operating the product
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
C
You may repeat laundry adding or
removing process as many times as
you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
C
If you select a new programme by turning
the Programme Selection knob while your
drier is in Pause mode, then the current
program is aborted and new programme
information is displayed.
Do not touch the inner surface of the
drum when adding or taking out laundry
while a programme is running. Drum
surface and dryer air within is hot.
5.18 Canceling the programme
To cancel the programme after the dryer is started:
•
Press and hold Start / Pause button for 1 seconds
to pause the programme and turn the programme
selection knob.
•
Press and hold On / Off / Cancel Button for 3
seconds and the programme will be cancelled.
A
As the dried laundry will be excessively
hot when you cancel the programme
while the dryer is running, activate the
Refresh programme to cool them down.
5.19 End of programme
When the programme comes to an end Lint filter
cleaning and Water tank warning symbols light up in
the programme follow-up indicator. To turn off the dryer
press On / Off / Cancel button.
Dryer / User Manual
C
2-hour Anti-creasing program will be
activated if the laundry is not taken out
after the program has come to an end.
C
Clean the lint filter after each drying. See
6.1 Cleaning lint filter and loading
door inner surface.
C
Drain the water tank after each drying
cycle. See 6.3 Draining the water
tank.
27 / 68 EN
Advertisement
Table of Contents
