Miele G 1 Series Manual page 10

Technical Information
Function
Water quantity
normal/increased
Soak activation/
deactivation
Pre-wash activation/
deactivation
Second interim rinse
Activating/deactivating
improved drying
Appliance width setting
Programming
Press the Delay Start
button 23x. The "Delay
Start" LED flashes 2x
slowly and 3x rapidly
intermittently. Press the
Start/Stop button as
appropriate to make the
desired setting.
Press the Delay Start
button 24x. The "Delay
Start" LED flashes 2x
slowly and 4x rapidly
intermittently.
Press the Start/Stop
button as appropriate to
make the desired setting.
Press the Delay Start
button 25x. The "Delay
Start" LED flashes 2x
slowly and 5x rapidly
intermittently. Press the
Start/Stop button as
appropriate to make the
desired setting.
Press the Delay Start
button 26x. The "Delay
Start" LED flashes 2x
slowly and 6x rapidly
intermittently. Press the
Start/Stop button as
appropriate to make the
desired setting.
Press the Delay Start
button 27x. The "Delay
Start" LED flashes 2x
slowly and 7x rapidly
intermittently. Press the
Start/Stop button as
appropriate to make the
desired setting.
Press the Delay Start
button 35x. The "Delay
Start" LED flashes 3x
slowly and 5x rapidly
1
intermittently. Press the
Start/Stop button as
appropriate to make the
desired setting.
10
G 1xxx/G 2xxx
Display
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately: p0 = Normal water
quantity (standard setting); p1 =
Increased water quantity. If
increased water quantity is
selected, approx. 16.7 fl.oz.
(500mL) more water is taken in
during each water intake cycle.
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately. Setting options: p0 =
Soak not activated; p1 = Soak
activated. If powder detergent is
used, approximately 1 teaspoon (5
grams) should be poured into
detergent chamber 1.
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately. Setting options: p0 =
Pre-wash not activated; p1 =
Pre-wash activated.
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately. Setting options: p0 =
Standard setting; p1 = With second
interim rinse.
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately. Setting options: p0 =
Normal drying time; p1 = Extended
drying time.
The "Rinse" LED is off or flashes.
The display shows p and a digit
alternately. Setting options: p0 =
24" (60cm); p1 = 18" (45cm).