Technical Data; Ec Declaration Of Conformity - DeWalt D25911 Manual

BREAKER
D25911
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Frequency
Power input (230V)
Current input (115V)
No‑Load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Weight
Noise values and/or vibration values (triax vector sum) according to
EN IEC 62841:
Measured A – weighted sound pressure at the operator's level
L (re 1 pW), in Decibel
PA
Measured A – weighted sound power level L
(re 1 pW), in Decibel
Uncertainty K / K , in Decibel
WA PA
Chiselling
Vibration emission value a
h,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
WALT one of the
e
D25911
V
AC
V 230/115
AC
Hz
W
A
bpm 810–1620
J
SDS max®
MHz
mW
kg
WA
= m/s 2
m/s 2
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
230
1
Breaker
50
D25911
1700
D WALT declares that these products described under
e
16
Technical Data are in compliance with: 2006/42/EC,
EN62841‑1:2015 +A11:2022, EN IEC 62841‑2‑6:2020 +A11:2020.
27
These products also comply with Directive 2014/53/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
12
2000/14/EC, Electrical concrete breaker (hand‑held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D‑90431
433
Nürnberg, Germany, Notified Body ID No.: 0197
0.03
Level of sound power according to 2000/14/EC (Article 12,
12.7
Annex III, No. 10; m ≤ 15 kg):
L (measured sound power level)
WA
L (guaranteed sound power level)
WA
90
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of D
98
3
Markus Rompel
Vice President of Engineering, PTE‑Europe
6.0
D WALT, Richard‑Klinger‑Straße 11,
e
1.5
65510, Idstein, Germany
07.05.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008 AND THE RADIO
EQUIPMENT REGULATION 2017
D WALT declares that these products described under
e
Technical Data are in compliance with:
WALT at
e
Breaker
D25911
English
98 dB
105 dB
WALT.
e
3