Table of Contents
Advertisement
Daily operation
Power status
Suspend mode (low-power)
Hibernate mode
On screen display
You can view the settings of the display in the On Screen Display (OSD) menu. By default the
OSD menu is read only.
The screen is divided in three areas.
Fig. 13: Overview of the OSD Main Menu
Area
1
2
3
NOTICE
The display is configured for pathology use. Changes to display settings are restricted.
Therefore the OSD menu is read only.
Open the main menu
► Select the Menu key to open the Main Menu.
20
1
2
3
Description
The navigation trail shows the menu hierarchy of the selected menu or setting.
Buttons to select a menu or display setting. All grey buttons are inactive.
To activate a button: use the up key, menu key and down key and navigate to the button. An activated
button turns red.
For the location of the up key, menu key and down key, see chapter "Front" on page 8.
Additional information about the selected display setting.
LED mode
Red (fast blinking)
Red (steady)
PP27QHD Display MMPC-4227F1
On screen display
Advertisement
Table of Contents
