Husqvarna TrioBrake 550XPG Workshop Manual page 22

Safety equipment
3
Loosen the movement limiter E. Loosen the screw
F and remove the cover. See figure 3.
4
Loosen the screws H to release the brake cable.
Pull back the rubber casing and loosen the screw
G. See figure 4
5
Detach the right-hand brake trigger from its mount
on the rear handle. See fig. 5.
Cleaning and inspection
Clean and check all parts carefully.
Parts must be replaced if cracked or showing signs
of other defects. Always use original spare parts.
22
- English
E
Fig 3
G
Fig 4
Fig 5
Fig 6
F
H