Plug And Play - Samsung CS29A200 Owner's Instructions Manual

ENG
14

Plug and Play

When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The follwing
settings are available.
1
If the television is in Standby mode (red light visible on the
television panel), press the POWER button (
control.
Result: The message Plug & Play is displayed. It flickers for
a little while, and then the Language menu is
automatically displayed.
2
Select the appropriate language by moving the joystick up or
down.
3
Press the joystick button (
Result: The message Antenna input check is displayed.
4
Make sure that the antenna is connected to the TV, and then
press the joystick button (
Result: The Area menu is displayed.
5
Select your country (or area) by moving the joystick up or down.
6
Press the joystick button (
Result: The Auto store menu is displayed.
7
To start the search, press the joystick button (
Result: The search will end automatically.
To stop the search before it has finished or return to normal
viewing, press the TV button (
8
When it has finished, the message Enjoy viewing your new TV
is displayed, and then the channel which has been stored will be
activated.
) on the remote
) to confirm your choice.
).
) to confirm your choice.
).
).