Blind-Spot Collision Warning Settings - Hyundai Palisade 2024 Owner's Manual

• Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear corner
radar.
• Blind-Spot Collision Warning may not
work properly if the bumper has been
replaced, or the surroundings of the
rear corner radar have been damaged
or paint has been applied.
• If a trailer, carrier, etc., is installed, it
may adversely affect the performance
of the rear corner radar or Blind-Spot
Collision Warning may not operate.
Blind-Spot Collision Warning
Settings
Blind-Spot Safety
B0320EU01
With the engine on, select or deselect
'Driver Assistance > Driving Safety >
Blind-Spot Safety' from the Settings
menu to set whether to use each
function.
• If 'Blind-Spot Safety' is selected,
Blind-Spot Collision Warning will warn
the driver with a warning message, an
audible warning and steering wheel
vibration depending on the collision
risk levels. Braking assist will be applied
for parking exit depending on the
collision risk levels.
B0320EU02
When activating Blind-Spot Collision
Warning or restarting the vehicle with this
function activated, the warning light on
the side mirrors will appear for
approximately 3 seconds. When the
vehicle is restarted with Blind-Spot
Collision Warning inactivated, the
warning message will appear on the
cluster.
WARNING
The driver should always be aware of the
surroundings and drive safely. If
'Blind-Spot Safety' is deselected,
Blind-Spot Collision Warning cannot
assist you.
Information
If the engine is restarted, Blind-Spot
Collision Warning will maintain the last
setting.
7
7-35