Table of Contents
Advertisement
Adjusting the Volume
+
Press the
button to increase the volume (cursor moves to the right)
-
Press the
button to decrease the volume (cursor moves to the left)
D ifferent Volume levels can be adjusted and saved for
each channel.
The volume setting is retained:
When you switch the television to standby mode
When you switch the television off using the
"POWER
If there is a power failure.
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1
Press the MUTE
Result:
The sound is switched off and "
2
When you wish to turn the sound back on at the same volume as
before, press the MUTE
buttons).
Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise.
This feature is working only weak signal condition, and that is
memorized on current channel, additional.
1
Press the MENU button.
Result:
The "Picture" menu is displayed.
2
+
–
Press the
or
button.
3
Press the
or
button to select the "LNA".
4
To select the "On" by pressing the
5
When you have finished, press the TV button, or press the MENU
button repeatedly to return to normal viewing.
" (ON/OFF)
button on the front panel
button.
" is displayed.
button again (or either of the volume
+
–
or
button.
Volume
12
Picture
Mode
Custom
Adjust
Digital NR
: Off
Tilt
:
0
LNA
: On
Select
Adjust
Exit
27
ENG
Hide quick links:
Advertisement
Table of Contents
