Samsung SyncMaster 732N User Manual page 38

Some of Samsung CDT monitors support the Highlight feature.
When using both the Highlight feature and MagicTune™ simultaneously, conflicts occur,
which cause errors.
Make sure to turn OFF Highlight before using MagicTune™.
Troubleshooting
MagicTune™ may not work in case monitor is replaced or driver of graphic card is updated while
MagicTune™ is operating. If so, please restart the system.
Symptom
Check when
MagicTune™ does not
function properly.
MagicTune™ doesn't
work properly.
Visit the MagicTune™ website
software upgrades.
Visit the MagicTune™ website
Check List
MagicTune™ feature is
found only on PC (VGA)
with Window OS that
supports Plug and Play.
Have you changed your
PC or video graphic
card?
Did you install the
program?
for technical support for MagicTune™, FAQs (questions and answers) and
and download the installation software for MagicTune™ MAC.
Solutions
* To check whether your PC is available for
MagicTune™ feature, follow the
steps below (When Windows™ is XP);
Control Panel → Performance and Maintenance →
System → Hardware → Device Manager →
Monitors → After deleting Plug and Play monitor,
find 'Plug and Play monitor' by searching new
Hardware.
MagicTune™ is an additional software for the
monitor. Some graphic cards may not support your
monitor. When you have a problem with the
graphic card, visit our website to check the
compatible graphic card list provided.
http://www.samsung.com/monitor/magicTune
Download the latest program. The program can be
downloaded
http://www.samsung.com/monitor/magicTune
Reboot the computer after installing the program
for the first time. If a copy of the program is already
installed, remove it, reboot the computer, and then
install the program again. You need to reboot the
computer for it to operate normally after installing
or removing the program.