Setting The Energy Prices - Daikin EHVX-E6V User Reference Manual

4.7.2 Setting the energy prices

EHBH/X04+08EA/EJ6V+9W + EHVH/X04+08S(U)18+23EA/EJ3V+6V+9W
Daikin Altherma 3 R F+W
4P629087-1 – 2020.08
Preset value
Electricity prices [7.5.1] High
under [7.5] User
[7.5.2] Medium
settings >
[7.5.3] Low
Electricity
price
Restriction: Only
applicable if
Bivalent is
enabled by the
installer.
Additional to the user-defined preset values, the system also contains some
system-defined preset values that you can use when programming schedules.
Example: In [7.4.2] User settings > Quiet > Schedule (weekly schedule for
when the unit has to use which quiet mode level), you can use the following
system-defined preset values: Quiet/More quiet/Most quiet.
In the system, you can set the following energy prices:
▪ a fixed gas price
▪ 3 electricity price levels
▪ a weekly schedule timer for electricity prices.
Example: How to set the energy prices on the user interface?
Price
Fuel: 5.3 euro cents/kWh
Electricity: 12 euro cents/kWh
To set the gas price
1 Go to [7.6]: User settings > Gas price.
2 Select the correct gas price.
3 Confirm the changes.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).
To set the electricity price
1 Go to [7.5.1]/[7.5.2]/[7.5.3]: User settings > Electricity
price > High/Medium/Low.
2 Select the correct electricity price.
3 Confirm the changes.
4 Repeat this for all three electricity prices.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).
Where used
You can use these preset values in
[7.5.4] Schedule (weekly schedule
screen for the energy prices).
See "4.7.2 Setting the energy
4
prices" [ 31].
Value in breadcrumb
[7.6]=5.3
[7.5.1]=12
4 Operation
|
—
User reference guide
31