Haier HWD9050AN1 User Manual page 12

3-11
Dry
On/Off
3-12
Dry Level
3-13
3-14
3-15
3-16
3-17
12
3.5.5 Function button"Dry On/Off "
Knob is in the "Dry+Wash" area, Perform default settings;
Touch "Dry On/Off " button (Fig. 3-11),dry function will be
switched off and only perform wash function.
3.5.6 "Dry Level" button
Press this button (Fig.3-12) to change or deselect the dry level
of the programme according tothe needs.
L1 :Press Dry level button, the display L1,it means that
clothes will be good for ironing after drying.
L2 (Default) :Press Dry level button, the display L2,it means
that clothes can be directly worn after drying.
L3 :Press Dry level button, the display L3,it means that
clothes can be stored directly after drying.
This function drying time can not be selected 30,60,90,120.
3.6 "Start/Pause" button
Press this bu tton (Fig. 3-13) gently to start or inte r-
rupt the current programme. During programme
setting and during programme run the LED above the
button is shining, or if interrupted blinking.
3.7 " Key lock"
Choosing a programme and then start, press button" Temp."
and "Sanitise" ( Fig .3-14) for 3 seconds simulta-
neously to block all panel elements against activation,
panel display . For unlocking please press again the
two buttons.The Key lock indicator lights up when the
Key lock works. Feature is optional when the machine
is running.
The display shows    (Fig. 3-15) if a button will be
pressed, when the Key lock is activated. The change
is not running.
3.8 Favourite
Choose a program and the desirable modifiers, then start
the cycle. Press "Spin Speed" and "Sanitise" (Fig. 3-16) for 3
seconds simultaneously to save personalised options for
available programme, panel displays
default parameters for all programmes please select
Express 15 programme and then touch button "Spin Speed",
"Speed Up" and "Dry On/Off" for 3 seconds simultaneausly,
the display shows
. For restoring the
(Fig. 3-17).
NZ AU