Bottom Cover - Lenovo ThinkEdge SE10 User Manual

Bottom cover

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Avoid contact with the hot computer. During operation, the computer becomes hot enough to burn the skin.
Before you touch the computer, turn off the computer, disconnect power, and wait approximately 30 minutes
for the computer to cool.
For access, do the following:
1. Turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
3. Unlock any locking device that secures the computer cover.
4. Remove the bracket, if any. See "DIN bracket kit" on page 45.
5. Turn over the computer so that the bottom cover is facing up.
Removal steps
1. Remove the bottom cover.
Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer.
Step Screw (quantity)
1
M2 × L4 mm, flat-head (8)
48
ThinkEdge SE10 User Guide
Color Torque
Black 0.215 Nm
(2.2 kgf-cm ± 0.25
kgf-cm)