Led Indicators - Harman Kardon LOVESAC STEALTHTECH EE4034 Setup Manual

Getting to Know Your System

LED Indicators

The LED indicators will behave di erently with each function.
FUNCTION
POWER ON/ All LEDs flash once.
WAKE FROM
STANDBY
SELECT INPUT
HDMI-ARC
Optical
Bluetooth
AUX
BLUETOOTH Bluetooth Input Selected.
Bluetooth Pairing Process:
1. Pairing: All LEDs flash slow.
2: Connected: All LEDs at full brightness.
MUTE LEDs used to display current volume will change
to half brightness when muted.
Example volume level
Example volume level when muted
QUIET COUCH All LEDs flash on at half brightness when engaged
QUIET
COUCH
All LEDs flash on at full brightness when
disengaged.
LED BEHAVIOR
LED Indicators
DESCRIPTION
Press the Power button on the Center Channel, remote control, or in the app.
On the Center Channel, press the Input button to change audio input.
On the remote control, press the Input button display the current input and
press again to change audio input. Or press the Bluetooth button to directly
select the Bluetooth input.
In the app, press the Input button at the top of the dashboard to change audio
input.
Select Bluetooth Input:
On the Center Channel, press the Input button until the Bluetooth input is
selected.
On the remote control and in the app, press the Bluetooth button once to
select Bluetooth input.
Pair to Bluetooth:
On the remote control, press and hold the Bluetooth button for 3 seconds to
initiate the pairing process.
On the Center Channel, press Input button until Bluetooth is selected. Press and
hold the Input button for 3 seconds to initiate Bluetooth pairing process.
On the remote control and in the app, press the Mute button to mute sound for
the entire system. Press again to unmute, or press VOL +/- buttons to unmute.
On the remote control and in the app, press the Quiet Couch button to engage.
Press again to disengage. See page 31 for a description of Quiet Couch.
39