Pairing a Bluetooth® Device .................. 11 Linking Two Speakers .................... 12 Light Modes ........................ 13 Using the Radio ......................13 USB Mode ........................15 Using the USB Charge Port .................. 16 App Control ........................ 17 TROUBLESHOOTING ............... 18 ION Audio Party Boom™ Plus User Guide...
Page 3
APPENDIX ................20 Technical Specifications ..................20 Trademarks & Licenses ..................21 ION Audio Party Boom™ Plus User Guide...
INTRODUCTION Thank you for purchasing the Party Boom™ Plus Speaker. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.
Repair If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still will not charge, contact ION Audio at ionaudio.com. Disposal Bring the unit to a recycling center or dispose of in accordance with local ordinances.
• WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry place where they will not be a ected by water and cause a risk of electric shock. ION Audio Party Boom™ Plus User Guide...
In Bluetooth and USB modes, press the Previous or Next button to go to the beginning of the current track or skip to the following track, respectively. Press the Previous button again within one second to skip to the previous track. ION Audio Party Boom™ Plus User Guide...
Page 8
Bluetooth, pause the music first and then wait for it to reconnect after the USB cable (not included) is inserted. You can also connect a USB flash drive here to play music. See Operation > USB Mode more information. ION Audio Party Boom™ Plus User Guide...
Page 9
Use these buttons to raise and lower the volume of the Bluetooth, USB, radio, or aux input from 0-30. Press and hold a button to raise or lower the volume quickly. 15. Power Button Press and hold this button to turn Party Boom™ Plus on and o . ION Audio Party Boom™ Plus User Guide...
Rear Panel Note: Pull the tab on the protective rubber panel to release it and access the rear panel port. 1. Power Input: Connect the included power cable here to charge the speaker. ION Audio Party Boom™ Plus User Guide...
“Bluetooth Pairing” if voice prompts are enabled. 3. Navigate to your device’s Bluetooth setup screen, find PARTY BOOM PLUS, and connect. The Bluetooth icon will appear in the display, and if voice prompts are enabled, you will hear “Bluetooth Connected”.
3. Once the speakers are linked, the primary speaker will automatically enter Bluetooth pairing mode. Navigate to your device's Bluetooth settings screen, find PARTY BOOM PLUS, and connect. When the connection is successful, you will hear "Bluetooth Connected" from the primary speaker (if voice prompts are enabled).
Random: The side LEDs cycle through the full spectrum of colors randomly, changing • every 5-7 seconds. Solid: All LEDs stay the same color (the color can be adjusted from the ION Sound • Control™ app). The default color is blue unless changed in the ION Sound Control™ app.
3. When you have selected the desired preset number, quickly press and release the Play/Pause / Presets button again to save it. To recall a previously saved preset, press and release the Play/Pause / Presets button to cycle through the saved presets. ION Audio Party Boom™ Plus User Guide...
• ALL: Repeat all of the tracks on the USB drive (Default mode). • FOLd: Repeat all of the tracks in the folder. • OnE: Repeat the current playing USB track. • rAn: Shu e the track order. ION Audio Party Boom™ Plus User Guide...
1. Connect a USB type-A cable to the USB Charge Port on the front panel of your Party Boom™ Plus speaker (see image). 2. Connect the other end of the cable to the charging input on your smartphone, tablet, or other compatible device. ION Audio Party Boom™ Plus User Guide...
Android OS or iOS on your device. Follow these steps to download the free app on your device: 1. Open the Apple App Store or Google Play on your device. Then, search for the ION Sound Control™ app. 2. Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound Control™...
• Reset the Bluetooth connection on your audio device by turning Bluetooth o and back on. You can find this under the Bluetooth menu in the Settings for your phone or other audio device. ION Audio Party Boom™ Plus User Guide...
Page 19
Stereo-Link™ mode. To stop the audio dropouts, exit Stereo-Link™ mode by double-pressing the Stereo-Link™ / Repeat button. Alternatively, you can wait for your unit to link to another speaker if there is one within range. ION Audio Party Boom™ Plus User Guide...
Page 20
For optimal performance, place the product so it is unobstructed by walls or furniture and is raised o the ground. ** Battery life may vary based on temperature, age, and volume usage of product. ION Audio Party Boom™ Plus User Guide...
Page 21
Trademarks & Licenses ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by ION Audio is under license.
Page 22
i o n a u d i o . c o m Manual Version 1.0...